Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 8
Explaining the Remote
The diagram to the left shows all functions of the
remote. Push the speed or light buttons once to turn
on; push the same button a second time to turn off.
You can use the ―off‖ button to power off the lights
and blower simultaneously.
The ―5 minute delay auto off‖ button can be pressed
when the blower is on at any speed. The blue light
behind the speed button will blink showing that this
feature has been activated. It will continue to blink for
5 minutes and then the blower will shut off
automatically. If you press the ―5 minute delay auto
off‖ button again the blinking on the speed button
stops and the blower has returned to manual mode.
If you would like to mount the remote to any surface near your range, Velcro pieces have been provided. Peel and
stick one piece to back of remote, and the other to desired surface.
If battery in remote needs replacing, use a CR2025 watch battery. These are very common and easy to find. To
access, look to the bottom end of the remote; push release to the right, and slide battery tray out.
Range of Remote Control
The infrared transmitter at the top of the remote must be pointed in the direction of the electronic control at the right
front of your hood or liner. Range distance will vary depending on your installation, but see diagram below for
approximate range area.