MultiSat Control Panel Owner’s Manual
48
Chapter 4 - Menu Functions
Changing the Sleep Mode Setting
Follow the process shown in Figure 4-6 to set Sleep Mode on or off.
With Sleep Mode enabled, when the vessel/vehicle comes to a stop
and holds its position for one minute (e.g., at a dock), the antenna unit
locks the antenna in place to conserve power. As soon as the vessel/
vehicle moves beyond a 1° - 2° window or the signal level changes
significantly, Sleep Mode automatically turns off and the system
begins tracking the satellite again.
Figure 4-6 Setting Sleep Mode On/Off
Operations Mode?
Yes Next Return
Get Antenna Status?
Yes Next Return
Man Control Antenna?
Yes Next Return
Set Sleep on/off?
Yes Next Return
Sleep Mode: ON
On
Enter
Off
Select On or Off as required,
then select Enter.
Control Antenna?
Yes Next Return
Select Next until “Operations
Mode?” is displayed.
<Default Display>
Menu
