MultiSat Control Panel Owner’s Manual
14
Chapter 2 - Installation
3.
Carefully disconnect the two power wires from the
maintenance port assembly’s power terminals. You will
reattach these wires later.
Do not disconnect the power
wires connected to the switchplate itself.
4.
Remove and save the standard maintenance port
assembly (see Figure 2-6).
Figure 2-6 Standard Maintenance Port Assembly
5.
Attach the MCP-ready maintenance port assembly to
the switchplate using two #4-24 screws (see Figure 2-7).
These screws simply replace the jack screws you
removed in Step 1.
Figure 2-7 MCP-Ready Maintenance Port Assembly
6.
Connect the switchplate’s two power wires and the
antenna’s data/power cable to the new maintenance
port assembly.
Standard
Maintenance Port Assembly
MCP-ready
Maintenance Port Assembly
Antenna
Data/Power
Power Wires
