19
This section details the ACU’s default network
settings, other available options, and methods for
changing settings. When the TracVision system is
connected to the vessel’s onboard network, or
you connect to the TracVision HD7 system using
an ad-hoc WiFi connection, the following
features are enabled:
• Remote operation of the TracVision HD7
system
• Remote viewing of the system’s status,
including current satellite signal levels,
satellite settings, and other system
information
NOTE:
When setting up a wireless network, be sure
to apply security settings, such as encryption, to
protect your network from outside intrusion. If your
network is not secure, outsiders within range of your
wireless network will be able to use your wireless
connection without your knowledge.
TIP:
The ACU is Bonjour
®
-enabled. Once the ACU is
connected to the vessel’s onboard network, you can use
Bonjour to easily connect to the ACU using a PC on
the same network, without requiring the IP address.
The ACU is displayed in Bonjour as:
hd7-<ACU
serial number>
. For more information, visit
Connect the ACU to the Network
Figure 32 Connection Options
RS232
Wi-Fi
KVH and TracVision are registered
trademarks of KVH Industries, Inc.
Tested to comply
with FCC Standards
Meets
requirements
ANTENNA
ETHERNET
AC INPUT
100-240V~
160W MAX
50/60 HZ
FUSE
3.15A
250V~
FAST ACTING
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device must not cause harmful
interence, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Red (+42V)
Blac
k (Gnd)
Not Used
Wht/Gr
y
Gr
y/Wht
Wht/Org
Org/Wht
Not Used
Wht/Br
n
Br
n/Wht
Wht/Blu
Blu/Wht
ETHERNET
WiFi Antenna
14
- Optional
