23
Choose one of the following options to check for
and install software updates.
NOTE:
Checking for updates requires Internet access.
Be sure to restart the TracVision system before
installing updates.
TIP:
You can view the ACU’s current IP address and
other Ethernet settings at any time using the ACU
buttons (see
).
Option A - Use the Web Interface
a.
Enter the ACU’s IP address into the address
bar of your web browser (see
).
b.
Log in to the web interface using the
username and password below.
username:
admin
password:
password
c.
Select Check for Updates (see
).
Then follow the onscreen instructions to
check for and install available software
updates.
Option B - Use a USB Flash Drive
If you already have new software saved on a USB
flash drive, just plug the flash drive into the USB
port and follow the ACU’s onscreen instructions
to update the software (see
).
Option C - Use the TracVision iPhone
®
App
If you have the KVH TracVision iPhone/iPod
touch application loaded and configured for use
with the network, follow the app’s onscreen
instructions to check for and install new
software.
You can download the TracVision iPhone app for free
from the Apple iTunes
®
app store.
Update the Software if Necessary
15
Figure 38 Check for Updates on Web Interface
Figure 39 USB Port on ACU
NOTE:
The software update (.kvh) file must be located
in the USB flash drive’s root directory. Be sure to keep
only one update file on the flash drive.
Check for Updates
CONTROL UNIT
MENU
CHANGE
ACCEPT
EXIT
ANTENNA
POWER
®
T R A C K I N G S A T S
D I R E C T V 9 9 / 1 0 1 / 1 0 3
USB Port
