9
GB
7.2.
Annually
1.
Check the tyre pressure according to the
inscription on the side.
2.
Uncouple the wheel assemblies from the
chassis and check the condition of the
holes where the locking bolt pin is inserted.
These should not be oval in shape.
3.
Uncouple the control arm from the chassis
and check the condition of the holes where
the locking bolt pin is inserted. These
should not be oval in shape.
4.
Pull the arm of the locking bolts and check
the correct movement of the pin. Once
released, it must return to its starting
position.
8.
Spare parts list
The following table is a non-exhaustive list of
the parts that can be replaced throughout the
service life of the tirak
™ transport trolley due to
wear and tear from regular use.
Code
Description
272247 Control arm
223166 Tyre
233445 Wheel axle
233425 Stabiliser
019606 M10X80 hex bolt with hole
005736 DIN 125A M10 flat washer
204786 4.5x30 ring pin
204796 M12 locking bolt with locknut
223186 DIN 471 Ø19 snap ring
If used in extremely harsh conditions or
in the presence of chemical agents, the
wear to the trolley components can be
excessive. In this case, the components must
be replaced more frequently.
