1-7 Jaw, Frame and Cam Removal
1) Remove the top front {pos.8, #36235} and
rear {pos. 5, #825} cams paying attention
to their orientation (Figures 127 & 128).
Ensure that you remove both top adjusting
washers {pos. 11, #9826}. Clean and
replace if necessary.
2) Remove the spring guide bolt (Figure 133).
3) Disassemble the (2) anchor frames {pos. 28,
#36205} and (2) jaw frames {pos. 28,
#36205}. See Figure 134. The washers may
still be stuck to the frames after removal.
Clean and replace if necessary.
9
NOTE:
The cams are installed correctly if you can see
an “S” in them. See Figures 129-132
NOTE:
Occasionally the washers stick to the cams and
frames upon removal.
Figure 127
Figure 128
Figure 129
Figure 130
Figure 131
Figure 132
Figure 133
Figure 134
