3. If blinking digit requires changing, use
s
or
t
buttons to
select correct number. Note that pressing the ENTER key
move the editor 1 digit to the RIGHT and pressing the MODE
key moves the editor 1 digit to the LEFT.
4. Press ENTER to move and edit next digit (right). Note that it
is blinking. Use
s
or
t
buttons to select correct number.
5. Repeat until frequency at bottom of display matches desired
frequency. Note: that if an active transmitter is within range, it
should be audible. You can adjust the frequency to optimize
the sound by using the
s
or
t
button on the rightmost digit
before saving the frequency.
6. Press ENTER to save the frequency. The memory location
number will blink. If the desired memory location is not dis-
played use the
s
or
t
button to selected the desired loca-
tion number.
7. Press ENTER to save the frequency in the displayed memory
location register.
Deleting a frequency:
1. Turn ON the receiver.
2. Use
s
or
t
to select the frequency (memory location) you
want to delete.
3. Press MODE button, M changes to CH in mode indication dis-
play line and memory number is replaced by 4 numbers with
the first digit (left) blinking. Note that the current frequency is
displayed at the bottom of LCD.
4. With the first digit (left) blinking, press
t
button until you see
four blinking dashes on the Mode indication display line.
5. Press ENTER, Note that the receiver automatically selects the
location that you started with in step one.
6. Press ENTER again and the memory location is now empty
and you are returned to memory selection mode.
11
