11
17. Attach two Small Base Caps (65) to the Bench
Base (53) with for M4 x 16mm Screws (87).
Press a 50mm x 70mm Inner Cap (76) into the
Bench Leg (48).
Attach the Bench Leg (48) to the Bench Base
(53) with four M10 x 72mm Bolts (96), two Bench
Base Joint Plates (64), and four M10 Nylon
Locknuts (29). Do not tighten the Locknuts yet.
17
64
64
53
76
48
65
65
87
87
96
29
18. Attach two Small Base Caps (65) to the Stabilizer
(58) with four M4 x 16mm Screws (87).
Attach the two Wheels (79) to the Stabilizer (58)
with two M10 x 45mm Bolts (32) and two M10
Nylon Locknuts (29). Do not overtighten the
Locknuts; the Wheels must be able to roll easi-
ly.
Attach the Bench Frame (52) to the Stabilizer (58)
with two M10 x 68mm Bolts (75), two M10
Washers (37), and two M10 Nylon Locknuts (29).
Make sure the decal is in the indicated posi-
tion. Do not tighten the Locknuts yet.
18
65
58
Decal
79
32
75
29
29
37
52
79
32
87
87
65
19. Press two Bushings (77) into the Bench Frame
(52).
Attach the Bench Frame (52) to the Bench Leg
(48) with four M10 x 94mm Bolts (94), two Bench
Joint Plates (63), and four M10 Nylon Locknuts
(29). Do not tighten the Locknuts yet.
19
48
94
77
52
29
63
63
77
20. Press four 20mm x 40mm Inner Caps (72) into
the ends of the two Backrest Frames (71).
Attach the Backrest Frames (71) to the Backrest
Bracket (49) with four M10 x 58mm Bolts (78),
four M10 Washers (37), and four M10 Nylon
Locknuts (29). Make sure the Backrest Frames
are oriented as shown. The Backrests Frames
must be parallel, with the indicated holes
aligned.
20
72
37
78
49
Holes
72
29
37
71
