20
Operating Manual
BlueTorq-Series
WWW.
TRACKWRENCH.COM
iii. Torque Counter
– Counter can be enabled/disabled
on compatible products and the counter limits set.
iv. Reset Product
– Perform factory reset on
the Torque Device. Note: This deletes all information
on the Torque Device including calibration information.
5.
SPC Graph:
Creates a visual representation of the chosen
torque results. Note: This feature is only available when ten or
more measurements using the same preset, have been
uploaded to the PCFE.
6.
Version:
Shows current version of the PCFE.
7.
Help:
Leads to instruction manuals for PCFE operation.
8.
Password:
Change existing password. Note: Only available
when PCFE opened with “master” password.
4.3.2.
Calibration
Settings
Figure 4.3.2.: Calibration Settings Screen
1.
Serial #:
The serial number of the product which can be
linked to a calibration certificate.
2.
Model:
The model number is the default value used but can
be changed if required without effecting the calibration of
the Torque Device.
3.
Device Span:
The upper limit of the torque range of
the Torque Device is shown here.
4.
Span Units:
Shows what units the Torque Device
was calibrated in.
5.
Period:
The number of days from the date of calibration until
it is recommended that the Torque Device is re-calibrated.
6.
Date:
The date on which the Torque Device was last calibrated.
