Traqmate User Manual V1.0
June 14, 2005
Copyright © 2005 Track Systems Technologies, LLC
Page 24
User Data Screen
Figure 18 - User Data Screen
Drivers
– Enter your drivers’ names and press Add to include them in the list. Click on the driver
in the list to select it as the default driver for the next recorded session.
Tracks
– Enter your track names and press Add to include them in the list. Click on the track in
the list to select it as the default track for the next recorded session. NOTE: Removing a track will
erase any Start / Finish line that might be recorded for that track.
Drivers
– Enter your vehicle names and press Add to include them in the list. Click on the vehicle
in the list to select it as the default vehicle for the next recorded session.
Sampling Rate
– Choose a sampling rate that is appropriate for the type of data you are
recording. A higher rate is appropriate for shorter runs like dragstrip runs and autocross, whereas
a slower rate would be best for a long endurance race.
To save the information in the Traqmate you must click on the Save User Setup button.
