Traqmate User Manual V1.0
June 14, 2005
Copyright © 2005 Track Systems Technologies, LLC
Page 10
Traqmate Installation
These diagrams show the overall connections for the Traqmate Basic and Traqmate Complete
Systems.
Figure 2 - Traqmate Basic Connections
Figure 3 - Traqmate Complete
Connections
Sensor Unit Installation
The Traqmate sensor unit may be mounted using a variety of methods depending on the
following factors: 1) How permanent is the desired
mount, 2) where is the preferred mounting point, 3) will
the SU be connected to a Display Unit (DU).
The Sensor Unit must be mounted as flat as
possible in the vehicle and such that the arrow on
the top label points in the direction of travel.
CHOOSE A LOCATION WHERE THE UNIT WILL
NOT BE SUBJECTED TO WATER. EXCESSIVE
MOISTURE EXPOSURE WILL DAMAGE THE UNIT.
This is to ensure the accelerometers are the most
accurate and have the best range for making measurements. It is also a
good idea to place the unit as close to the vehicle’s center of gravity as
possible. While not required, especially with connection to the DU, it may
be desirable to mount the SU in a location that allows the indicator lights
to be viewed easily by the driver. Given these considerations, a position
on the floor of the front passenger footwell may work well.
The mounting of the SU may be accomplished in a variety of ways, but
the most desirable and secure method is to use the Sensor Unit
