www.tracer.eu
36
Wireless-N Broadband Router 11N – User Guide
Po
łą
czenia:
The Top Panel
There are the Router’s LED indicators on the top panel as shown below.
Diody LED:
LED
Indicator
Status
Description
POWER
Always ON
The POWER indicator is Always ON when it is powered on and works properly.
SYS
Blinking
The SYS is blinking regularly when the system works normally.
WAN
Always ON
Indicates the correct connection of the WAN ports.
Blinking
Indicates the Router is transmitting/receiving data packets.
WLAN
Blinking
Indicates the wireless signal is OK.
LAN(1/2/3/4)
Always ON
Indicates the correct connection of the LAN ports.
Blinking
Indicates the Router is transmitting/receiving data packets.
WPS
Blinking
Indicates the Router is negotiating with WPS clients in WPS Mode (PBC or PIN Code).
Rear Panel Interface
Description
1-4 (LAN Ports)
Connect to Ethernet devices (such as computers, switches, hubs).
RESET/WPS
Note:
After pressing the RESET button for 7 seconds, the con
fi
gurations you have set will be deleted
and the device will restore to the factory default settings. If you press this button for 1 second, the
WPS (PBC) function is enabled.
WAN
Connect to DSL Modem, Cable Modem or community broadband
POWER
Receptor for the supplied power adapter.
Rear Panel Interface
Description
1-4 (LAN Ports)
Connect to Ethernet devices (such as computers, switches, hubs).
RESET/WPS
Note:
After pressing the RESET button for 7 seconds, the con
fi
gurations you have set will be deleted
and the device will restore to the factory default settings. If you press this button for 1 second, the
WPS (PBC) function is enabled.
WAN
Connect to DSL Modem, Cable Modem or community broadband
POWER
Receptor for the supplied power adapter.
