www.tracer.eu
56
Wireless-N Broadband Router 11N – User Guide
Chapter 9: Traf
fi
c Control
Traf
fi
c Control
Traf
fi
c control is used to limit communication speed in the LAN
and WAN. Up to 20 entries can be supported with the capability
for at most 254 PCs’ speed control, including for IP address range
con
fi
guration.
Enable Traf
fi
c Control
: To enable or disable the internal IP
bandwidth control.
Interface:
To limit the uploading and downloading bandwidth in
WAN port.
Service:
To select the controlled service type, such as HTTP
service.
IP Starting Address:
The
fi
rst IP address for traf
fi
c control.
IP Ending Address:
The last IP address for traf
fi
c control.
Uploading/Downloading:
To specify the traf
fi
c heading way for the
selected IP addresses: uploading or downloading.
Bandwidth:
To specify the uploading/downloading Min. /Max. Traf
fi
c
speed (KB/s), which can not exceed the WAN speed.
Apply:
To enable the current editing rule. If not, the rule will be
disabled.
Add:
After edit the rule, click the “add to list” button to add the
current rule to rule list.
Apply:
Click
“Save”
to activate the current rule.
Cancel:
Click
“Cancel”
to drop all setting saved last time.
It is allowed to delete or modify the previous rules in the list table.
