www.tracer.eu
61
Wireless-N Broadband Router 11N – User Guide
Restore to Factory Default Settings
This button is to reset all con
fi
gurations to the default values. It
means the Router will lose all the settings you have set. So please
Note down the related settings if necessary.
Restore to Factory Default Settings:
Click this button to restore to
default settings.
Factory Default Settings:
User Name:
admin
Password:
admin
IP Address
: 192.168.0.1
Subnet Mask:
255.255.255.0
NOTE:
After restoring to default settings, please restart the
device, then the default settings can go into effect.
Reboot
Rebooting the Router makes the settings con
fi
gured go into effect or
to set the Router again if setting failure happens.
Reboot the router:
Click this button to reboot the device.
Change Password
This section is to set a new user name and password to better
secure your router and network. Please Note that the new password
should be less than 14 characters.
User Name:
Enter a new user name for the device.
Old Password:
Enter the old password.
New Password:
Enter a new password.
Re-enter to Con
fi
rm:
Re-enter to con
fi
rm the new password.
NOTE:
It is highly recommended to change the password to
secure your network and the Router.
System Log
The section is to view the system log. Click the “Refresh” to update
the log. Click “Clear” to clear all shown information. If the log is over
150 records, it will clear them automatically.
Refresh:
Click this button to update the log.
Clear:
Click this button to clear the current shown log.
