TR-Electronic CMV-65 Series, User Manual

Page: 92 / 109

Parameterization and configuration
TR-Electronic GmbH 2008, All Rights Reserved Printed in the Federal Republic of Germany
Page 92 of 109 TR - ECE - BA - DGB - 0068 - 01 06/19/2012
7.8.5 Short Diagnostics
Availability
PNO CLASS1 16 + 32 PNO CLASS2 16 + 32 TR-Mode Position X TR-Mode Po Rpm.
not supported! not supported! page 82
–
The number of diagnosis bytes can be restricted from 6+51 bytes to 6+10 bytes with
this parameter, such that the measuring system can also be operated with older
PROFIBUS master releases.
7.8.6 Scaling function
Availability
PNO CLASS1 16 + 32 PNO CLASS2 16 + 32 X TR-Mode Position TR-Mode Po Rpm.
not supported! page 78 + 80 not supported!
–
Defines whether the position is scaled according to the parameters
-
"Steps per revolution"
-
"Total measuring range"
If Class 2 is switched off, the position value cannot be scaled or adjusted.
7.8.7 Scaling parameter PNO CLASS 2
If the scaling parameters are activated with the
Scaling function , the physical
resolution of the measuring system can be changed. The position value output is
binary decoded and is calculated with a zero point correction and the count direction
set. The measuring system does not support decimal numbers in this configuration or
numbers of revolutions (gearbox function) deviating from exponents of 2.
7.8.7.1 Steps per revolution
Defines how many steps the measuring system outputs for one revolution of the
measuring system shaft.
lower limit 1 step / revolution
upper limit 4096 steps per revolution (Max. value see nameplate)
default 4096