Page 4-1
Installation Checkout
TQG191-IM
Rev 0: 28 Feb 2019
KTX2
Installation Manual
SECTION 4
INSTALLATION CHECKOUT
4.1 INTRODUCTION
This section contains instructions to operate, configure and check out the installation of the
KTX2. Power-up and normal (inflight) operations are discussed in Paragraph
Error! Reference
source not found.
and detailed configuration instructions are described in Paragraph 4.4.
Refer to the fault isolation information provided in paragraph 4.4.5 for help in correcting
installation issues found during checkout.
Refer to paragraph 2.5 Equipment Required But Not Supplied for details on equipment used in
this section.
4.2 BASIC DISPLAYS AND CONTROLS
The KTX2 is a User configurable Mode-S Extended Squitter ADS-B Rule Compliant transponder
that meets all the requirements for the FAA 2020 ADS-B OUT Mandate. All operating controls
and configuration options are accessed from the front panel screen (Figure 4-1). No external
configuration software is required.
4.2.1.1 Control and Display Screen
The main screen provides all the necessary command and annunciation functions for normal
operations and also displays the Set-Up and Configuration menus.
Figure 4-1: Controls & Display Screen