Page 4-19
Installation Checkout
TQG191-IM
Rev 0: 28 Feb 2019
KTX2
Installation Manual
4.4.5 Errors and Warnings
The KTX2 will alert the User to three types of anomalies as indicated in Table 4-6:
•
Warnings
•
Set-up Errors
•
Elementary Function Errors
ALERT / WARNING
MEANING
ACTION REQUIRED
If no FID-Code (Flight ID) and
the corresponding Aircraft
Address (AA-Code) is entered
or uncomplete, the following
displays will appear after
switching on the transponder
Enter appropriate FID and AA-
Code described in paragraphs
4.4.2.1 and 4.4.2.2
•
Err FPGA
•
Intern. Comm. Fail
•
Do System Restart
•
Send Unit for servicing
•
Send Unit for servicing
•
Switch Unit OFF & ON
again
•
No output from
Transponder. Check all
connections and battery
voltage (4.4.4.2)
•
If no root cause discovered,
send unit for servicing
•
Data from GPS source not
sufficient
•
Check GPS source
•
Not enough satellites
•
Battery voltage has fallen
below 11 VDC
•
Check battery
•
Increase engine RPM
•
Check generator output
(Unit will operate > 9 VDC)
