Page 1-1
General Information
TQG191-IM
Rev 0: 28 Feb 2019
KTX2
Installation Manual
SECTION 1
GENERAL INFORMATION
1.1 INTRODUCTION
This manual describes the physical, mechanical, and electrical characteristics as well as
instructions, conditions, and limitations for installation and approval of the KTX2 Transponder
System.
1.2 DEFINITIONS
Acronym
Definition
AA — Aircraft Address – ICAO 24-bit address
AC — Advisory Circular, or Aircraft Category
ADS-B — Automatic Dependent Surveillance-Broadcast
AML — Approved Model List
APP — Application
ARINC — Aeronautical Radio, Incorporated
ATCRBS — Air Traffic Control Radar Beacon System
DL — Data Loading
DME — Distance Measuring Equipment
ETX — End of Transmission
FCC — Federal Communications Commission
FID — Flight ID
FPGA — Field Programmable Gate-Array
GND — Ground
GNSS — Global Navigation Satellite System
LRU — Line Replaceable Unit
NAS — National Airspace System
NOTAM — Notice to Airman
RAIM — Receiver Autonomous Integrity Monitoring
RF — Radio Frequency
RTCA — Radio Technical Commission for Aeronautics
RX — Receive
SBAS — Satellite-Based Augmentation System
SPE — Single Point Entry
STB — Standby
STC — Supplemental Type Certificate
TQ-G — TQ-Group
TSO — Technical Standard Order
TX — Transmit
WAAS — Wide Area Augmentation System
