Page 34
12. Automatic Datalogging
The
WP-91
can automatically log readings. First the logging period must
be programmed, then automatic logging can be started and stopped as
required.
1. Select the Program menu (
→
F2:Notepad
→
F4:Prog.
).
2. The display should now look like this:
>00< F1:Min F2:Sec
↑↑↓↓
:Period F3:Hr
3. Use the
and
keys to set the period at which the
WP-91
will
automatically log records.
4. When the logging period has been correctly set, select whether this
period is in minutes, seconds or hours.
Press
to save the period as minutes.
Press
to save the period as seconds.
Press
to save the period as hours.
eg: If the period was set to
05
, followed by
, then the
WP-91
will
automatically log a record every 5 seconds.
5. If the optional RS232 port is fitted, the
WP-91
will ask if the records
are to be logged into the Notepad, or sent directly to the RS232 port.
Press
to log records into the Notepad (maximum of 150
readings).
Press
to send records directly to the RS232 port.
6. The automatic logging function is now programmed, and can be
started and stopped as required.
Continued over the page…