12
13
EN
PREPARING TEA
In order to ensure the best tea taste the machine has a specific tea brewing program
for each tea type.
(Fig. 7)
The 4 colours of the tea brewing buttons (3) symbolize the
4 tea brewing programs for green teas, black teas, oolong teas and herbal teas.
green:
Green teas
black:
Black teas
red:
Oolong teas
yellow:
Herbal teas
Steps to prepare your Tpresso® tea:
1)
Insert the desired Tpresso® capsule into the capsule holder (4).
(Fig. 9)
2)
Slide the capsule holder (4) into the machine and lower the machine lever (1).
(Fig. 10)
3)
Place a Tpresso® teapot or a cup of your choice under the dispensing opening.
4)
Press the tea brewing button (3) which corresponds to the capsule lid colour. After
reaching the set quantity the machine
stops.
(Fig. 11)
5)
Lift the machine lever (1) and remove the capsule holder (4). Dispose the used
capsule.
6)
Enjoy your perfect cup of Tpresso® tea.
Note:
When brewing tea, there may be a short interruption which lasts only a few seconds
before the machine will dispense the tea into the pot or the cup. During this time, the
flavours of the tea are activated by water vapor. The interruption is not an error, please
do not press any tea brewing button (3) in the meantime.
Important:
Only use Tpresso® capsules for the Tpresso® tea machine.
Attention:
For correct hygiene and to maintain high product quality, it is advisable to remove the
capsule from the capsule holder (4) immediately after dispensing.
Caution:
Be aware of sharp pins in brewing unit and sharp edges in bottom of capsule holder.
MY CUP – INDIVIDUAL QUANTITY SETTING
The optimal tea brewing program for every of our teas has been developed together
with tea-experts.
The standard Tea quantity is 185ml corresponding to a standard teacup.
With MY CUP you can set your desired tea quantity and thus make your tea more
intensive with a lower quantity and less intensive with a higher quantity.
For programming your individual quantity press and hold the corresponding tea
brewing button (3) until your desired quantity is reached.
This quantity is now programmed as MY CUP and will be dispensed any time you
press this tea brewing button.
Through a factory reset the programmed quantity will be set to the original amount.
Factory reset
All programmed parameter can be reset to factory default values. For a factory reset
press two tea brewing buttons (3) simultaneously until all 4 tea brewing buttons (3)
blink.
Fig. 1
Fig. 5
Fig. 2
Fig. 14
Fig. 13
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 8
Fig. 7
Fig. 6
Fig. 4
Fig. 3
8
2
1
9
4
5
6
1
4
1
4
5
6
5
6
Fig. 9
Fig. 1
Fig. 5
Fig. 2
Fig. 14
Fig. 13
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 8
Fig. 7
Fig. 6
Fig. 4
Fig. 3
8
2
1
9
4
5
6
1
4
1
4
5
6
5
6
Fig. 10
Fig. 1
Fig. 5
Fig. 2
Fig. 14
Fig. 13
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 8
Fig. 7
Fig. 6
Fig. 4
Fig. 3
8
2
1
9
4
5
6
1
4
1
4
5
6
5
6
Fig. 11
Black
Red
Green
Yellow
Capsule
lid colour
