background image

6

7

EN

  Only connect the machine to a regular electrical outlet  

  with the power supply 220 - 240 V / 50 - 60 Hz.  

  Always be certain that the electrical outlet is provided  

  with a ground line and that it is of a voltage  

  corresponding to that indicated on the machine’s data  

  plate, which is situated at the bottom of the machine  

 base.

  Do not allow the power cord to pass around corners,  

  over sharp edges, or over very hot objects, and keep it  

  away from oils.

  Do not carry and/or pull the machine by the power cord.

  Do not unplug the machine by pulling on the power  

  cord, and do not touch the plug with wet or moist  

 hands.

  In the event that boiling water and/or steam escapes,  

  beware of the danger of scalding!

  The appliance must be switched on exclusively for the  

  time necessary for its use, after which it should be  

  turned off with the main switch (9) and the plug  

  should be removed from the power socket.

  Use the appliance only indoors, protected from  

  external weather conditions.

    This appliance is intended to be used in households 

and similar applications such as:

  Staff kitchen areas in shops, offices and other working  

 environments;

  Farm houses;

  By clients in hotels, motels and other residential type  

 environments;

  Bed and breakfast type environments.

  This appliance is intended to brew tea in a cup with a  

 Tpresso

®

 capsule.

    Always remove the power cable from the power 

outlet:

  Before removing or replacing the water tank.

  When filling the water tank.

  If a malfunction occurs.

  When the machine is not going to be used for long  

  periods of time.

  Before cleaning the machine.

    Caution. Follow the instructions given below in  

order to have maximum lifetime of the machine:

  Use cold fresh water to fill the water tank (in order to  

  achieve the best tea taste result with the tea machine  

  it is recommended to use fresh bottled water, e.g.  

  from the brand *Vittel®).

  Do not use sparkling mineral water or other fluids.

  Always ensure that the machine is operated with a  

  filled tank. Running the water pump without water in  

  the tank can cause the pump to overheat.

  Clean the machine and remove lime scale regularly 

  (see chapter „Cleaning and maintaining the machine“).

    Caution. This machine dispenses hot liquid!  

*Vittel® is a brand from a third party which is not related 

with Tpresso AG.

Summary of Contents for tea machine












Reviews: