14
15
EN
FURTHER FUNCTIONS AND INFORMATION
Energy saving function
15 minutes after last use, the machine automatically goes into energy saving mode
(standby mode), indicated by alternating dimmed and bright lights of the tea
brewing buttons (3).
By pressing any of the 4 tea brewing buttons (3), the machine will heat up again to
be ready for use within 20 seconds.
Emptying the drip tray
Switch off the machine.
Remove the grid (5) and the drip tray (6).
(Fig. 12)
Clean the drip tray (6) and the grid (5) regularly by rinsing them manually or by
washing them in the dishwasher.
Place the grid (5) on the drip tray (6) and reinsert it.
(Fig. 13)
Operating the machine with tap water
You can operate the machine with tap water, but to ensure a high and consistent
flavour quality, the use of water softening filters are recommended, as degrees of
water hardness can vary significantly from region to region.
Introduce the Tpresso® water softening filter or the Tpresso® filter pad into the water
tank (8).
(Fig. 14)
It is advisable to replace the filter every 250 Tpresso® teas or every 6 months.
CLEANING AND MAINTAINING THE MACHINE
Removing lime scale - decalcification
Every 6 months in the case of soft water (degree of hardness up to 25°f)
Every 4 months in the case of hard water (degree of hardness over 25°f)
To check the hardness of the water in your town, please contact your local authorities.
To remove lime scale, please follow the steps below:
Insert a non-toxic or non-harmful descaling product for tea and coffee machines in
the water tank. Do not use vinegar, lye or salt as they could damage the machine.
For rinsing follow the instructions of the corresponding descaling product.
After applying a descaling product, rinse the machine with at least one full water
tank before brewing tea again. For rinsing instructions please follow the steps
described in the section “First time use”.
Cleaning
Before attempting to clean the machine, turn the power switches off and unplug
the appliance. Also, allow the machine to cool down for 10 minutes.
Do not subject the machine to jets of water, or immerse it partially or totally.
Do not dry any part of the machine in conventional and/or microwave ovens.
It is not allowed to service the inner parts of the machine. Otherwise there is a risk
of injury and the warranty becomes void.
Clean the capsule holder on a regular basis by rinsing it manually or by washing it in
the dishwasher.
Repair
In the event of a malfunction or damage, unplug the machine. Contact the
manufacturer. Never operate a defective machine. Only the manufacturer can repair
the appliance.
The manufacturer disclaims responsibility for any damage and/or injury that may
result in the event of service that is carried out in breach of the safety instructions
according to this user manual or is executed by unauthorised personnel.
Fig. 1
Fig. 5
Fig. 2
Fig. 14
Fig. 13
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 8
Fig. 7
Fig. 6
Fig. 4
Fig. 3
8
2
1
9
4
5
6
1
4
1
4
5
6
5
6
Fig. 1
Fig. 5
Fig. 2
Fig. 14
Fig. 13
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 8
Fig. 7
Fig. 6
Fig. 4
Fig. 3
8
2
1
9
4
5
6
1
4
1
4
5
6
5
6
Fig. 1
Fig. 5
Fig. 2
Fig. 14
Fig. 13
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 8
Fig. 7
Fig. 6
Fig. 4
Fig. 3
8
2
1
9
4
5
6
1
4
1
4
5
6
5
6
