COMMUNICATING TO A PC (Continued)
Titn:
This mode will transfer saved tightness tests. After selecting
“Titn” the 712 displays “Send”. After communication is complete the
712 will return to normal operation. Communication mode is still acti-
vated.
S-Lg
: This mode will transfer data logged using the single log mode.
After selecting “S-Lg” the 712 will display “Addr” and an address loca-
tion from 0 to 4 will blink. Use the Up/Down Arrow Keys to select the
desired address location to transfer data from and press the
Scroll/Enter Key. While the 712 is communicating “Send” will be dis-
played. After communication is complete the 712 will return to normal
operation. Communication mode is still activated.
Logg
: This mode transfers data logged using logg mode. After select-
ing “Logg” the 712 will display “Page” and a page location from 0 to 3
will blink. Use the Up/Down Arrow Keys to select the desired page
location to transfer data from and press the Scroll/Enter Key. While the
712 is communicating “Send” will be displayed. After communication
is complete the 712 will return to normal operation. Communication
mode is still activated.
5. Requests for stored, real time, and tightness test data can be made
from the PC through Hyper Terminal to the 712.
Requesting Stored Data
1. Follow steps 1 through 3.
2. From your computer type QTS (All Caps) and press ENTER.
3. The 712 will send stored data and return to normal operation.
Requesting Real Data
1. Follow steps 1 through 3.
2. From your computer type QTR (All Caps) and press ENTER.
3. The 712 will send Real time data and return to normal operation.
33
COMMUNICATING TO A PC
This function requires the optional A767 IrDA Adapter. Please refer to the
A767 manual for complete instructions on using the adapter. Optional soft-
ware part number A772 is available for use with MICROSOFT
®
WIN-
DOWS or communication can be performed using MICROSOFT
®
HYPER
TERMINAL or similar communication program.
USING MICROSOFT
®
®
HYPER TERMINAL
1. Open MICROSOFT
®
HYPER TERMINAL and set the COM port as fol-
lows:
Baud: 9600
Data Bits: 8
Parity: None
Stop Bit: 1
Flow Control: None
2. Activate communication mode by pressing and holding the Print/Com
Key until a beep is heard and ‘COMM’ is flashing in the upper right
hand of the display.
3. Connect the A767 IRDA Adapter to the computer and turn it on. Place
the adapter 6 to 8 inches from the 712 with a clear line of sight
between the sensor windows.
4. Press and hold the Recall key until a beep is heard. The 712 will dis-
play ‘Real’, ‘Stor’, ‘Titn’, “S-Lg”, and “Logg” (Use the Down Arrow Key
to scroll down the screen to see “S-Lg” and “Logg”). Using the Up and
Down Arrow Keys, select the desired transfer mode and press the
Scroll/Enter Key.
Real
: This mode will transfer current readings (real-time) to the com-
puter. After selecting “Real” the 712 displays “Send”. After communi-
cation is complete the 712 will return to normal operation.
Communication mode is still activated.
Stor
: This mode will transfer data stored in the 50 save locations to the
computer. After selecting “Send” the 712 displays “Send”. After com-
munication is complete the 712 will return to normal operation.
Communication mode is still activated.
32
