RECALLING DATA
The recall feature allows you to display stored data or retrieve the results of a
tightness test.
Stor Recall Mode
- Allows data stored during tests to be recalled from
memory and displayed.
Titn Recall Mode
- Allows data stored during tightness tests to be
recalled from memory and displayed.
CAL Recall Mode
- Allows the last date of calibration to be recalled from
memory and displayed.
1. Press the Recall Key. “Stor”, “Titn”, and “CAL” will be displayed. Select
“Stor” to display test data previously stored in a memory location, select
“Titn” to display data previously stored from a tightness test, or select
“CAL” to display the last date of calibration. Use the Up/Down Arrow Keys
to select the desired mode and press the Scroll/Enter Key.
To cancel
recalling data press the Recall Key and use the Up/Down Arrow Keys to
select “Yes” and press the Scroll/Enter Key.
2. “Addr” and an address location from 0 to 49 will be displayed (Except for
“CAL”). Use the Up/Down Arrow Keys to select the address location to
view and press the Scroll/Enter Key.
To cancel recalling data press the
Recall Key and use the Up/Down Arrow Keys to select “Yes” and press
the Scroll/Enter Key.
3. The Time and Date of the Saved Data from the selected address location
will be displayed flashing on the screen. The rest of the Saved Data at this
address location can be reviewed by pressing the Up/Down Arrow Keys.
(Except for “CAL”)
4. Press the Scroll/Enter Key once when you are finished reviewing the data.
'End' will be displayed. To exit recall mode and return to normal operation
use the Up/Down Arrow Keys to select “Yes” . Press the Scroll/Enter Key.
To continue recalling data from memory locations use the Up/Down
Arrow Keys to select “No” . Press the Scroll/Enter Key and repeat steps 1
through 4.
Note: During recall if “Null Data” is displayed there is no stored data
in the address selected. Select another address or perform another test
and make sure data is stored as outlined on page 25.
27
STORING DATA
During testing data can be stored for later retrieval. The store function can be
activated in any mode except leak detection.
The store key also activates
tightness test mode. To perform or save a tightness test please refer to page
22.
When data is saved, all data previously in the address will be overwrit-
ten.When saving pressure/draft readings, select an address different from
the one used to save combustion readings.
1. Press the Store/Logger Key and “Stor” will be displayed. To proceed
press the Scroll/Enter Key.
To cancel storing information press the
Store/Logger Key and use the Up/Down Arrow Keys to select “Yes” and
press the Scroll/Enter Key.
2. “Addr” and an address location from 0 to 49 will flash on the display. Use
the Up/Down Arrow Keys to select the desired location to store the data
and press the Scroll/Enter Key.
To cancel storing information press the
Store/Logger Key and use the Up/Down Arrow Keys to select “Yes” and
press the Scroll/Enter Key.
3. The data is stored and “End” will display. Use the Up/Down Arrow Keys to
select “Yes” to stop storing data and return to normal operation or select
“No” to store data again. Press the Scroll/Enter Key.
You have just successfully stored a set of readings which can be reviewed
on screen (see page 26) or sent to the IR printer (see page 27)
26
