TP-Link VIGI NVR1016H User Manual Download Page 13

Page: 13 / 153

Chapter 1

Get Started

4. Set the recording schedule according to your needs. By default, the settings are applied to all

cameras managed by the NVR. Click

Turn on 24-Hour Continuous

Recording

All of the cameras will be set to record continuously (24/7).

Turn on 24-Hour Motion

Detection Recording

The camera starts to record when a motion is detected.

Enable Loop Recording

Click the check box to overwrite the oldest recording files
with the latest one when the hard drive is full.

Long-term Storage (Only for

VIGI NVR1016H)

Click the check box to reduce the size of the video and
maximize recording storage.

Note:

If you have enabled Plug and Play, this function cannot

be enabled.

Expected Recording Time

(Only for VIGI NVR1016H)

Select the recording time you expect.

Summary of Contents for VIGI NVR1016H


























































































































































Search results

Summary of Contents for VIGI NVR1016H

Reviews:

Related manuals for VIGI NVR1016H

Brands by name

Popular brands

TP-Link VIGI NVR1016H, User Manual

Search results

Summary of Contents for VIGI NVR1016H

Reviews:

Related manuals for VIGI NVR1016H

Brands by name

Popular brands