TL-WR702N
150Mbps Wireless N Nano Router
- 37 -
•
Version
-
you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is
Automatic (Recommended)
, which can select
WPA-PSK
(Pre-shared
key of WPA) or
WPA2-PSK
(Pre-shared key of WPA) automatically based on the wireless
station's capability and request.
•
Encryption
-
When
WPA-PSK
or
WPA
is set as the Authentication Type, you can select
Automatic (Recommended)
,
TKIP
or
AES
as Encryption.
•
PSK Password -
You can enter
ASCII
or
Hexadecimal
characters. The default password
is the last unique eight numbers of each Router’s MAC address.
For
ASCII
, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length
should be between 8 and 63 characters.
For
Hexadecimal
, the key can be made up of any numbers 0 to 9 and letters A to F, the
length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case keys will
affect the outcome. It would also be a good idea to write down the key and all related
wireless security settings.
•
Group Key Update Period -
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the
Save
button to save your settings on this page.
4.6.3 MAC Filtering
Choose menu “
Wireless
→
MAC Filtering
”, and then you can control the wireless access by
configuring the
Wireless MAC Filtering
function, as shown in Figure 4-10.
Figure 4-10 Wireless MAC Filtering
To filter wireless users by MAC Address, click
Enable
. The default setting is
Disabled
.