TP-Link TL-WR702N User Manual Download Page 41

Page: 41 / 186

TL-WR702N

150Mbps Wireless N Nano Router

- 29 -

Figure 4-2 Status

Firmware Version -

The version information of the Router’s firmware.

Hardware Version -

The version information of the Router’s hardware.

LAN

This field displays the current settings or information for the LAN, you can configure

them in the

Network > LAN

page.

•

MAC address -

The physical address of the Router, as seen from the LAN.

•

IP address -

The LAN IP address of the Router.

•

Subnet Mask -

The subnet mask associated with LAN IP address.

Wireless

This field displays basic information or status for wireless function, you can

configure them in the

Wireless > Wireless Settings

page.

•

Wireless Mode -

The current wireless working mode in use.

•

Wireless Radio -

Indicates whether the wireless radio feature of the AP is enabled or

disabled.

•

Name (SSID) -

The SSID of the AP.

•

Channel -

The current wireless channel in use.

•

Mode -

The current wireless mode which the Router works on.

Summary of Contents for TL-WR702N



























































































































































































Search results

Summary of Contents for TL-WR702N

Reviews:

Related manuals for TL-WR702N

Brands by name

Popular brands

TP-Link TL-WR702N, User Manual

Search results

Summary of Contents for TL-WR702N

Reviews:

Related manuals for TL-WR702N

Brands by name

Popular brands