TP-Link TL-WA901N User Manual Download Page 45

Page: 45 / 58

Chapter 4

Configure the Access Point

• Enable

- Turn on/off Ping Watch Dog.

• IP Address

- The IP address of the target host where the Ping Watch Dog Utility is

sending ping packets.

• Interval

- Time interval between two ping packets which are sent out continuously.

• Delay

- Time delay before first ping packet is sent out when the access point is

restarted.

• Fail Count

- Upper limit of the ping packets the access point can drop continuously. If

this value is overrun, the access point will restart automatically.

4. 5. 4. Firmware Upgrade

TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the

Support

page of our website

www.tp-link.com

and upgrade the firmware to the latest version.

1. Download the latest firmware file for the access point from our website

www.tp-link.com

2. Visit

http://tplinkap.net

, and log in using the password you created.

3. Go to

System Tools

Firmware Upgrade

4. Click

Choose File

to locate the downloaded firmware file, and click

Upgrade

4. 5. 5. Factory Defaults

1. Visit

http://tplinkap.net

, and log in using the password you created.

2. Go to

System Tools

Factory Defaults

. Click

Restore

to reset all settings to the default values.

• The default

IP Address

: 192.168.0.254

• The default

Subnet Mask

: 255.255.255.0

Summary of Contents for TL-WA901N



























































Search results

Summary of Contents for TL-WA901N

Reviews:

Related manuals for TL-WA901N

Brands by name

Popular brands

TP-Link TL-WA901N, User Manual

Search results

Summary of Contents for TL-WA901N

Reviews:

Related manuals for TL-WA901N

Brands by name

Popular brands