39
Chapter 4
Configure the Access Point
• Rate
- The Throughput unit.
• Run Time
- How long this function is running.
• Transmit
- Wireless transmit rate information.
• Receive
- Wireless receive rate information.
Click
Start
/
Stop
to start or stop wireless throughput monitor.
4. 5. System Tools
4. 5. 1. SNMP
Simple Network Management Protocol (SNMP) is a popular network monitoring and
management protocol.
1. Visit
, and log in using the password you created.
1. Go to
System Tools
>
SNMP
.
• SNMP Agent
- Select the radio button before Enable will enable this function if you
want to have remote control through SNMPv1/v2 agent with MIB-II. Select the radio
button before Disable will disable this function. The default setting is Disable.
• SysContact
- The textual identification of the contact person for this managed node.
• SysName
- An administratively-assigned name for this managed node.
• SysLocation
- The physical location of this node.
Note:
If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
• Get Community
- Enter the community name that allows Read-Only access to the
Device’s SNMP information. The community name can be considered a group
password. The default setting is “public”.
• Get Source
- Get source defines the IP address or subnet for management systems
that can read information from this ‘get’ community device.
