37
Point-to-Point Protocol frames insider Ethernet frames. PPPoE connection is used mainly with
ADSL service where individual users connect to the ADSL transceiver (modem) over Ethernet
work. It also widely used in XDSL (digital affiliate line such as ADSL, VDSL or SDSL)
2)
The IP Camera needs to be rebooted after it finishes changing the network completely. For more
details, please refer to
Section 6.1.3 Initialize,
3)
The IP Camera with Intelligent IP Installer can’t be founded after PPPoE is active, but you can get
the IP address of the Camera by IP Notification function. For the details, please refer to
Section
6.3.6 IP Notification.
4)
If the IP Notification function is not configured to report the IP address of the Camera, you can
reset the Camera to its factory default settings by pressing the Reset button. Then the Camera can
be found by Intelligent IP Installer.
6.3.3 DDNS (Dynamic DNS)
DDNS is a system which allows the domain name data held in a name server to be updated in real time.
The most common use for DDNS is allowing an internet domain name to be assigned to a computer with
a varying / dynamic IP Address. This makes it possible for other sites on the internet to establish
connection to the machine without needing to track the IP Address themselves.
¾
Server Name
: Choose the DDNS Server from the list.
¾
User ID
: Enter the user ID for authentication necessary for DDNS connections. Type it up to 64
characters.
¾
Password
:
Enter the password for authentication necessary for DDNS connections. Type it up
to 32 characters.
¾
Re-type Password
:
Re-type the password to confirm.
¾
Host Name
: Enter the host name that is registered to the DDNS server.
)
Note:
How to apply DDNS username and Host name?
You can apply DDNS username and Host name by
the following steps:
1. Login
http://www.dyndns.org
, click the
Creat Account
.
