manualshive.com logo in svg

TP-Link TL-PS110U, User Manual

Share
Download
TP-Link TL-PS110U User Manual Download Page 48

6. Network Print Monitor 

 

Preparation 

The print server supports 

TCP/IP

, 

IPX/SPX

 and 

NetBEUI

 protocols under Windows 

95/98/Me. Please make sure that the following steps have been completed before 
proceeding with installation under Windows PC. 
 
 
Select A Desired Protocol 

TCP/IP 

…

  The TCP/IP Protocol must be installed.  For further information, please read “

TCP/IP 

Protocol Installation”

 section in this chapter. 

 

Note:

 If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print 

server” section later in this chapter. 

 

 

IPX/SPX 

The IPX/SPX-compatible Protocol must be installed.  For further information, please read 
“

IPX/SPX-compatible Protocol Installation”

 section in this chapter. 

 
 
 

NetBEUI 

 
The NetBEUI protocol must be installed. For further information, please read “

NetBEUI 

Protocol Installation”

 section in this chapter. 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

48

Summary of Contents for TL-PS110U
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands