manualshive.com logo in svg

TP-Link TL-PS110U, User Manual

Share
Download
TP-Link TL-PS110U User Manual Download Page 20

4 

(Optional)

 In the 

Subnet Mask 

option, type the Subnet Mask your LAN or network 

segment is currently configured to use. 
 

5 

(Optional)

 In the 

Gateway

 field, type the IP address of gateway. 

 
6 

When done, click 

OK

 button. The program will save the above settings into the print 

server. 

 
7 Done 

 
 

NetWare Wizard 

1.  Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 

2. Click 

Wizard

 button just like a picture 

＜

＞

.and select 

NetWare Wizard

, as follow 

picture. 

 

 

3.  Select the NetWare File Server to which the print server device will be attached. 
 
4.  Type in a Print server. 
 
5.  Type in a Print Queue Names. 
 

Note:

 Each print queue corresponds to each print port of the print server. 

 
6. Click 

OK

. 

 
7. Done. 
 
8.  From your NetWare client computer, such as Windows 95/98/Me, create a printer that is 

connected (redirected) to one of the NetWare print queues serviced by the print server. 

 
 
 

 

20

Summary of Contents for TL-PS110U
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands