manualshive.com logo in svg

TP-Link TL-PS110U, User Manual

Share
Download
TP-Link TL-PS110U User Manual Download Page 40

IP Address: 

This option allows you to input IP address from the print server. The IP address 

must meet the IP addressing requirements of the network segment. 

 Note: 

On the TCP/IP Setup screen, specify a fixed IP address is highly 
recommended. 

Subnet Mask: 

This option allows you to input subnet mask from the print server. The IP 

address must meet the IP addressing requirements of the network segment. 

Gateway

: This option allows you to input gateway from the print server. This IP address of 

gateway must meet the router or gateway to go across of the network 
segment. 

Rendezvous Settings

: Enable/Disable the Rendezvous support for Mac OS 10. 

SMB Workgroup/Shared Name Setting: 

This option allows you to change the SMB name 

of print server to support the SMB printing on Windows 2000 and above.  

 
 

NetWare Setup 

 

1.Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 

2.Select NetWare and type in the Print server that created during PCONSOLE Select the 

NetWare File Server to which the print server device will be attached. 

3.Click 

Setup

, it then appears the sub-menu.

 

 

4.Click 

NetWare

, it then as shown in the following picture. 

 

 

40

Summary of Contents for TL-PS110U
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands