TP-Link TD-W8970N User Manual Download

Page: 60 / 116

TD-W8970N

Wireless N ADSL2+ Modem Router User Guide

Figure 4-52

4.4.10.1 DNS Server

Choose “

Advanced Setup

”

“

DNS

”

“

DNS Server

”. You can see the

DNS Server

Configuration

screen, this screen allows you to configure the DNS Server Addresses as shown in Figure 4-53.

Figure 4-53

For PPPoA, PPPoE enabled PVC(s), please select the

Obtain DNS info from a WAN interface

checkbox, this Router will accept automatically the first received DNS assignment from the
selected configured WAN interface during the connection establishment.

For single PVC with IPoA, static IPoE protocol, please select the

Use the following Static DNS IP

address

checkbox, and enter the primary and /or optional secondary DNS server IP addresses

provided by your ISP.

Click the

Apply/Save

button to save the new configuration.

4.4.10.2 Dynamic DNS

Choose “

Advanced Setup

”

“

DNS

”

“

Dynamic DNS

”, you can see the

Dynamic DNS

screen,

this screen allows you to configure the Dynamic DNS (shown in Figure 4-54).

Summary of Contents for TD-W8970N





















































































































Search results

Summary of Contents for TD-W8970N

Reviews:

Related manuals for TD-W8970N

Brands by name

Popular brands

TP-Link TD-W8970N, User Manual

Search results

Summary of Contents for TD-W8970N

Reviews:

Related manuals for TD-W8970N

Brands by name

Popular brands