TD-W8970N
Wireless N ADSL2+ Modem Router User Guide
The Router's ports, where the cables are connected, and RESET button are located on the back
panel.
Figure 1-2
¾
LINE:
Connect to the Modem Port of Splitter or to the telephone line.
¾
1, 2, 3, 4 (LAN):
The ports (1, 2, 3, 4) connect the Router to the local PC(s).
¾
Reset:
There are two ways to reset the Router's factory defaults.
1) Use
the
Restore Default
function on
Management
->
settings
->
Restore Default
page
in the router's Web-based Utility.
2) Use the Factory Default
RESET
button: With the Router powered on, use a pin to press
and hold the
RESET
button for at least 5 seconds. And then release the button and wait
the Router to reboot to its factory default settings.
¾
POWER:
The Power plug is where you will connect the power adapter.
¾
ON/OFF:
The switch for the power.
¾
Wireless Antennas:
To receive and transmit the wireless data.
5
