TD-W8970N
Wireless N ADSL2+ Modem Router User Guide
higher priority, such as voice data packets give higher priority than Web data packets. This option
will provide better service of selected network traffic over various technologies.
Figure 4-42
Select the
Enable QoS
checkbox to enable all QoS for all interfaces.
Select a
Default DSCP make
from drop-down list to automatically mark incoming traffic without
reference to a particular classifier.
Click
Save/Apply
to save the current configuration.
)
Note:
The default DSCP mark is used to mark all egress packets that do not match any classification
rules.
4.4.8.1 Queue Config
Choose “
Advanced Setup
”
Æ
“
Quality of Service
”
Æ
“
Queue Config
”, you can set up virtual
servers on the screen below.
Figure 4-43
Click the
Add
button in Figure 4-43, and you can configure the QoS queue entry on the next
screen as shown in Figure 4-44.
47
