TD-W8970N
Wireless N ADSL2+ Modem Router User Guide
)
Note:
The following section adopts different VPI, VCI to introduce further configuration for the different
connection types, if you need to change the configuration of ATM PVC (VPI/VCI), you should go to
the previous section (
4.4.1 Layer2 Interface
) to configure them again.
)
Note:
ETH and ATM service can not coexist. If the ETH Interface had configured, you cannot configure
any other WAN service over the ATM Interface until the ETH Interface is deleted.
4.4.2.1 ATM-EoA-PPPoE
If your ISP provides a
PPPoE
connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add
a
new
ATM interface and select
EoA
option for DSL Link Type (
4.4.1.1 ATM interface
).
2. Click
the
Add
button on the screen Figure 4-7 and you will enter the next screen as shown in
Figure 4-8. Click
Next
.
Figure 4-8
3. Select
the
WAN service type
in Figure 4-9. If your ISP provides a PPPoE connection, select
PPPoE
option. You can create a service name for the
Service Description
or leave it the
default name. Click
Next
.
21
