TD-W8950ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
To remove a static routing entry:
1. Select
the
Remove
check box according to the entry in the Figure 4-51.
2. Click
the
Remove
button, and the entry will be deleted.
)
Note:
Gateway IP address should be correctly configure
d if IP based Interface (IPoE, IPoA) i
s selected.
4.4.10.3 RIP
Choose “
Advanced Setup
”
Æ
“
Routing
”
Æ
“
RIP
”, you can see the RIP (Routing Information
Protocol) screen which allows you to configure the RIP (shown in Figure 4-53).
Figure 4-53
)
Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).
To activate RIP for the device, configure an individual interface, select the desired RIP version and
operation, and select
Enabled
checkbox for the interface.
Click
Save/Apply
to save the configuration.
4.4.11 DNS
When you select the connection type
PPPoE
,
PPPoA
or
IPoA
for WAN configuration, you will see
the
DNS
menu in the Web-based Utility (shown in Figure 4-54). It includes
DNS Server
and
Dynamic DNS
submenus.
51
