TD-W8950ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-3
¾
VPI
/
VCI
: the VPI and VCI values provided by your ISP. Do not change them unless it was
required by your ISP.
¾
DSL Link Type
: Select a DSL Link Type which is provided by your ISP. The options include
EoA
(it
is for PPPoE, IPoE, and Bridge),
PPPoA
(PPP over ATM) and
IPoA
(IP over ATM).
¾
Encapsulation Mode
: The mode of the data processing over the Link Type you have
selected. Uses the default setting, if you are not sure.
¾
Service Category
: Select the type of the service assigned by your ISP in the drop-down list.
The default type is
UBR Without PCR
.
)
Note:
Enabling packet level QoS for PVC improves performance for selected classes of applications.
While QoS consumes system resources; therefore the number of PVC(s) will be reduced. Besides
this, it cannot be set for the connection type of CBR and Real-time VBR. If you select the QoS
service, the Quality of Service menu will be added to the Web-based Utility, the detailed
configuration will be described in
4.4.8 Quality of Service
.
4.4.1.2 ETH interface
Choose “
Advanced Setup
”
Æ
“
Layer2 Interface
Æ
ETH Interface
”, you can configure ETH WAN
interfaces on the screen below.
Figure 4-4
)
Note:
To make sure the ETH port available, you should first choose “
Advanced Setup
”
Æ
“
LAN Ports
” to
20
