TD-W8950ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
port will be redirected to the computer specified by the server IP. Any PC that was used for a
virtual server must have a static or reserved IP Address because its IP Address may change when
using the DHCP function.
Figure 4-25
¾
Virtual Server Table:
The table indicates the information about the Virtual Server entries.
•
Server Name:
This is the name of the
Virtual Server
. It is exclusive and must be filled in.
•
External Port Start:
The base number of External Ports. You can type a service port or
End:
The end number of External Ports. You can type a service port or
tart:
The base number of Internal Ports. You can type a service port or
ort End:
The end number of Internal Ports. You can type a service port or leave
.
providing the service application.
) and then click the
Remove
ing entry will be deleted in the table.
, and then you will see the new
Virtual Server in the next screen as shown in Figure 4-26.
leave it blank.
•
External Port
leave it blank.
•
Protocol:
The protocol used for this application,
TCP
,
UDP
, or
TCP/UDP
.
•
Internal Port S
leave it blank.
•
Internal P
it blank.
•
Server IP Address:
The IP Address of the PC providing the service application
•
WAN Interface:
The WAN Service Interface
¾
Add:
Click the
Add
button to add a new entry.
¾
Remove:
Select the check box in the table (shown in Figure 4-25
button, then the correspond
To add a virtual server entry:
1. Click
the
Add
button on the preceding screen Figure 4-25
35
