TP-Link RE350 AC1200, Manual

Page: 21 / 43

Connect the Extender to the Internet
Select WPA/WPA2
– Personal
:
Select the security version. WPA2-PSK is recommended.
Select the encryption type. TKIP is NOT recommended if the
extender operates in 802.11n mode, because TKIP is not
supported by 802.11n specification and the WPS function.
Enter a new password in the Password field.
Select WEP :
Select the security type. The defult is auto, which automatically
chooses Open System or Shared Key based on the capability
and access request of the wireless client.
Select the WEP key format. ASCII format is a combination of
alphabetic and numeric characters. Hexadecimal format is a
combination of the numbers (0-9) and letters (A-F, a-f).
Select the key type. 64-bit allows you to enter 10 hexadecimal
digits or 5 ASCII characters into the Key Value field. 128-bit
allows you to enter 26 hexadecimal digits or 13 ASCII characters
into the
Key Value field.
Enter the WEP key into the Key Value field.

Mode: Select a transmission mixed mode.

Channel Width: Select a channel bandwidth for the wireless network.

Channel: Select the operating channel for the wireless network. It is
recommended to leave the channel to Auto, if you are not
experiencing the intermittent wireless connection issue.
Enjoy the Internet
Now you can connect to the AP
’s wireless network to enjoy the Internet.
There are three ways to connect your devices to the AP by WPS.
Launch a web browser, log into http://tplinkrepeater.net , and then
You can connect your wireless devices to the AP’s wireless
network by WPS. For detailed instructions, please refer to
Connect your devices to the AP by WPS .