40
Chapter 10
NAT Forwarding
10. 1. Translate Address and Port by ALG
ALG (Application Layer Gateway) allows customized NAT (Network Address Translation)
traversal filters to be plugged into the gateway to support address and port translation
for certain application layer “control/data” protocols: FTP, TFTP etc. Enabling ALG is
recommended.
Visit
http://tplinkwifi.net
, and log in with the password you set for the AP. Go to
Advanced
>
NAT Forwarding
>
ALG
.
•
PPTP Pass-through:
If enabled, it allows Point-to-Point sessions to be tunneled
through an IP network and passed through the AP.
•
L2TP Pass-through:
If enabled, it allows Layer 2 Point-to-Point sessions to be tunneled
through an IP network and passed through the AP.
•
IPSec Pass-through:
If enabled, it allows IPSec (Internet Protocol Security) to be
tunneled through an IP network and passed through the AP. IPSec uses cryptographic
security services to ensure private and secure communications over IP networks.
•
FTP ALG:
If enabled, it allows FTP (File Transfer Protocol) clients and servers to transfer
data via NAT.
•
TFTP ALG:
If enabled, it allows TFTP (Trivial File Transfer Protocol) clients and servers
to transfer data via NAT.
•
H323 ALG:
If enabled, it allows Microsoft NetMeeting clients to communicate via NAT.
•
RTSP ALG:
If selected, it allows media player clients to communicate with streaming
media servers via NAT.
•
SIP ALG:
If enabled, it allows clients communicate with SIP (Session Initiation Protocol)
servers via NAT.
