TP-Link EC120-F5 User Manual Download Page 64

Page: 64 / 107

Chapter 10

Customize Your Network Settings

10. 6. 2. Specify the 6rd Tunnel with Parameters Provided by Your ISP

Specify the 6rd tunnel with the parameters provided by my 6rd
tunnel service provider.

Visit

http://tplinkwifi.net

, and log in with the password you

set for the router.

Go to

Advanced

Network

IPv6 Tunnel

Enable

IPv6 Tunnel

, and select

6rd

as the tunneling

mechanism and select a WAN connection from the drop-
down list.

According to the parameters provided by your ISP, choose

Auto

Manual

. More parameters are needed if you choose

Manual

Click

Save

Note:

If there is no available WAN connection to choose, make sure you have

connected to the internet and the connection type is not Bridge.

Now you can visit the IPv6 websites with the 6rd tunnel.

Tips:

The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection
and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.

I want to:

How can I

do that?

How can I

do that?

Done!

Summary of Contents for EC120-F5












































































































Search results

Summary of Contents for EC120-F5

Reviews:

Related manuals for EC120-F5

Brands by name

Popular brands

TP-Link EC120-F5, User Manual

Search results

Summary of Contents for EC120-F5

Reviews:

Related manuals for EC120-F5

Brands by name

Popular brands