15
Chapter 4
5 ) If you choose
PPTP
, enter the
Username
and
Password
, and select the
IP
Address Type
provided by your ISP. Different parameters are needed according
to the IP address type you selected.
5. Click
Save
to make the settings effective, and you can refer to
to test the Internet connection.
Note:
It may take 1-2 minutes to make the settings effective.
Tips:
1. You can check your internet connection by clicking
Network Map
on the left of the page.
2. If you use
Dynamic IP
and
PPPoE
and you are provided with any other parameters that are not required on the page,
please go to
Advanced
>
Network
>
Internet
to complete the configuration.
3. If you still cannot access the internet, refer to the
section for further instructions.
4. 3. Set Up an IPv6 Internet Connection
If your ISP provides information about one of the following IPv6 internet connection
types: PPPoE, Dynamic IP (SLAAC/DHCPv6), and Static IP, you can manually set up an
IPv6 connection.
If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6
connection by referring to
.
