105
4. Disable DHCP:
1 ) Go to
Network
>
DHCP Server
.
2 ) Deselect
Enable DHCP Server
and click
Save
.
Now you can go to
Advanced
>
Status
>
Wireless
to check the WDS status. When the
WDS status
is
Run
, it means WDS bridging is successfully built.
Q6. What should I do if I cannot access the internet even though the
configuration is finished?
1.
Visit
http://tplinkwifi.net
, and log in with your TP-Link ID or the password you set for
the router.
2.
Go to
Advanced
>
Status
to check internet status:
As the follow picture shows, if IP Address is a valid one, please try the methods below
and try again:
• Your computer might not recognize any DNS server addresses. Please manually
configure the DNS server.
