71
Chapter 5
Configure the Router in Access Point Mode
•
Tracert
is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol
network.
2 ) Enter the
IP Address
or
Domain Name
of the tested host.
3 ) Modify the
Ping Count
number and the
Ping Packet Size
. It’s recommended to
keep the default value.
4 ) If you have chosen
Tracert
, you can modify the
Traceroute Max TTL
. It’s
recommended to keep the default value.
4. Click
START
to begin the diagnostics.
The figure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through
Ping
.
The figure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through
Tracert
.
5 7 Time Settings
This page allows you to set the time manually or to configure automatic time
synchronization. The router can automatically update the time from an NTP server via
the internet.
1. Visit
http://tplinkwifi.net
, and log in with the password you set for the router.
2. Go to
System
>
Time
.
