TP-Link Archer AX95 User Manual Download Page 40

Page: 40 / 135

Chapter 7

Wireless Settings

Note:

• The Effective Time Schedule is based on the time of the router. You can go to

Advanced

System

Time & Language

to modify the time.

• The wireless network will be automatically turned on after the time period you set.

7 3 Use WPS for Wireless Connection

Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-
protected Wi-Fi connection.
1. Visit

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for

the router.

2. Make sure the Wi-Fi of your router is on and go to

Advanced

Wireless

WPS

7 3 1 Connect via the Client’s PIN

Enter the PIN of your device and click

Connect

. Then your device will get connected to

the router.

Summary of Contents for Archer AX95








































































































































Search results

Summary of Contents for Archer AX95

Reviews:

Related manuals for Archer AX95

Brands by name

Popular brands

TP-Link Archer AX95, User Manual

Search results

Summary of Contents for Archer AX95

Reviews:

Related manuals for Archer AX95

Brands by name

Popular brands