TL-WA501G
54M Wireless Access Point User Guide
the
Privilege
pull-down list and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button.
6. Click the
Add New...
button and enter the MAC address 00-0A-EB-00-07-8A in the
MAC Address
field, enter wireless station C in the
Description
field, select
128-bit
in the
Privilege
pull-down list, enter 2F34D20BE2E54B326C5476586A in the
WEP
Key
field and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button.
The filtering rules that configured should be similar to the following list:
Figure 5-13: The filtering list
Note
:
a) If you select the radio button
Allow the stations not specified by any enabled
entries in the list to access
for
Filtering Rules,
the wireless station B will still
not be able to access the AP, however, other wireless stations that are not in
the list will be able to access the AP.
b) If you enable the function and select the
Deny the stations not specified by
any enabled entries in the list to access
for
Filtering Rules,
and there are
not any enable entries in the list, thus, no wireless stations can access the AP.
5.4.4 Wireless Statistics
This page shows
MAC Address
,
Current Status
,
Received Packets
and
Sent Packets
for each connected wireless station
.
Figure 5-14: The AP attached wireless stations
¾
MAC Address -
The connected wireless station's MAC address
¾
Current Status
-
The connected wireless station's running status, one of
STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK
/ AP-UP / AP-DOWN / Disconnected
¾
Received Packets
-
packets received by the station
¾
Sent Packets
-
packets sent by the station
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the
Refresh
button.
-
21
-
