background image

 

 

11

5.2 Wireless Remote Controller   

 

Table 2: Functions of Each Keys of the Wireless Remote Controller 

Name Function 

ON/OFF button 

z

 

Press this button, the unit will be started or stopped, which can clear 
the timer or sleeping function of last time. 

- /+ button 

z

 

When press + button , the setting temp. will be increased by 
1   ,Wh

en press -button, the setting temp. will be decreased by 

1 The temp. will be changed quickly by pressing the button 

continuously and setting temp. range is 16~30

 

MODE button 

z

 

Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected 
circularly. Auto mode is default while power on. Under Auto mode, 
the temperature will not be displayed; Under Heat mode, the initial 
value is 28 (82 );Under other modes, the initial value is 

25 (77 ).

 

 

 AUTO 

 COOL 

 DRY 

 FAN 

  HEAT (only for cooling and heating unit) 

SWING UP AND 

DOWN BUTTON 

z

 

Swing mode is defaulted for the wireless remote control. In this 
mode, press this button , could turn on or turn off the Up and down 
swing function. 

z

 

When unit is turned off, synchronously press "+" and Up and down 
swing buttons, it could be switched between the swing mode and 
stationary swing mode, at this time,   blinks 2 seconds. 

Summary of Contents for TGS-100FSA-E

























Reviews: